Item #CUCB-20: Average 1"x1"x1" tall, .30 lbs., highly polished Copper Cube.
|
Item #MS-321: Our spheres are solid balls of pure, native Michigan Copper. They have been tumbled smooth and show distinctive Copper color over their entirety, but they lack high luster. Specimens average size is 1" in diameter.
|
Item #MS-304: 1"+ Native Copper Paperweight. Highly polished on the top side and sealed with a clear protective coating. The sides have a heavy patina of natural green oxidation.
|
Item #MS-309: 1.25" Copper Ore Slabs. Highly polished; sealed with a protective coating.
|
Item #MS-322: Our spheres are solid balls of pure, native Michigan Copper. They have been tumbled smooth and show distinctive Copper color over their entirety, but they lack high luster. Specimens average is 1.25" in diameter.
|
Item #323: Our spheres are solid balls of pure, native Michigan Copper. They have been tumbled smooth and show distinctive Copper color over their entirety, but they lack high luster. Specimens average size is 1.5" in diameter.
|
Item #MS-376: 1.5" Sculptured Copper. Lacquer coated. No two are alike.
|
Item #MS-305: 1.5"+ Native Copper Paperweight. Highly polished on the top side and sealed with a clear protective coating. The sides have a heavy patina of natural green oxidation.
|
Item #CUEG-32: Average 2" tall, .90 lbs., Copper Egg. The eggs have the sand cast texture which has been tumbled with a burnishing media.
|
Item #MS-310: 2" Copper Ore Slabs. Highly polished; sealed with a protective coating.
|
Item #MS-377: 2" Sculptured Copper. Lacquer coated. No two are alike.
|
Item #MS-311: 2.5" Copper Ore Slabs. Highly polished; sealed with a protective coating.
|
Item #MS-315: 2.5" Native Michigan Float Copper. Lacquer coated. No two are alike.
|
Item #MS-312: 3" Copper Ore Slabs. Highly polished; sealed with a protective coating.
|
Item #MS-317: 3" Native Michigan Float Copper. Lacquer coated. No two are alike.
|
Item #MS-387: 4.5' x 4" tall Clocks of native Michigan Copper in natural red/brown and green matrix. Round Quartz movements with white faces and gold trim. Lacquer coated front and sides; cork covered bottom.
|
Item #MS-543: 4"x6" tall, Copper Cross with hook.
These copper crosses were created from Michigan copper. The crosses have polished areas and green patina with lacquer coating to preserver the color.
|
Item #MS-318: 2" - 2.5" long Copper Drops from the White Pine Mine in Michigan. Backs are flat for display.
|
Item #MS-319: 1.5" - 1.75" long Copper Drops from the White Pine Mine in Michigan. Backs are flat for display.
|
Item #MS-320: 2.5" - 2.75" long Copper Drops from the White Pine Mine in Michigan. Backs are flat for display.
|
Item #MS-388: 1" - 1.25" long Copper Drops from the White Pine Mine in Michigan. Backs are flat for display.
|
Item #CUHT-24: Average 1.7"x1.5" tall, .35 lbs., Copper Heart.
The hearts have the sand cast texture which has been tumbled with a burnishing media.
|
Item #CUHT-10: Average 1.1"x1" tall, .11 lbs., Copper Heart. The hearts have the sand cast texture which has been tumbled with a burnishing media.
|
Item #CUPY-35: Average 2"x2" tall, highly polished, solid Copper Pyramid. The bottom is covered with cork to protect surfaces. Approximately 1 pound.
|
Item #MS-302: Approximately 5" x 7" Michigan Copper Wall Sculpture; no two are alike.
|
Item #MS-233: From Michigan; 14.5"x7"x12.5" tall; 97 lbs.; Copper, Green and Brown.
|
Item #KG-NC-3: 1" Copper Specimens. Native Copper bearing rock from Michigan’s Keweenaw Peninsula is crushed leaving behind these jagged copper specimens. Some have host rock attached.
|
From Michigan; 30"x6" tall; 26.70 lbs.; Copper and Green.
| | |